Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH 사용자 설명서
Chapter 8. Status Monitoring and Statistics
|
237
NETGEAR 8800 User Manual
Event Actions
The actions that you can define for each alarm are shown in
.
To be notified of events using SNMP traps, you must configure one or more trap receivers, as
described in the section,
described in the section,
Displaying RMON Information
To view the status of RMON polling on the switch (the enable/disable state for RMON
polling), use the following command:
polling), use the following command:
show management
To view the RMON memory usage statistics for a specific RMON feature (for example,
statistics, events, logs, history, or alarms) or for all features, use the following command:
statistics, events, logs, history, or alarms) or for all features, use the following command:
show rmon memory {detail | <memoryType>}
SMON
SMON is the common abbreviation for the Switch Network Monitoring Management
Information Base (MIB) system defined by the Internet Engineering Task Force (IETF)
document RFC 2613. SMON is a set of MIB extensions for RMON that allows monitoring of
switching equipment from a SNMP Manager in greater detail. The supported MIB tables are
described in
Information Base (MIB) system defined by the Internet Engineering Task Force (IETF)
document RFC 2613. SMON is a set of MIB extensions for RMON that allows monitoring of
switching equipment from a SNMP Manager in greater detail. The supported MIB tables are
described in
smonPrioStatsControlTable
and
smonPrioStatsTable
cannot be supported due to hardware
limitations.
Note:
When you delete all the mirroring filters through the
portCopyConfigTable
, the mirroring is disabled automatically.
Table 29. Event Actions
Action
High Threshold
no action
log
Sends a log message.
log-and-trap
Sends both a log message and a trap to all trap
receivers.
receivers.
snmp-trap
Sends a trap to all trap receivers.