Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH 사용자 설명서

To use TACACS+ server features, you need the following components:

TACACS+ client software, which is included in the XCM8800 software.

A TACACS+ server, which is a third-party product.

TACACS+ provides many of the same features provided by 

RADIUS. You cannot use RADIUS and TACACS+ at the same time.

TACACS+ is a communications protocol that is used between client and server to implement 
the TACACS+ service. The TACACS+ client component of the XCM8800 software should be 
compatible with any TACACS+ compliant server product. For information on installing, 
configuring, and managing a TACACS+ server, see the product documentation for that 
server.

The following sections describe how to configure the XCM8800 TACACS+ client component 
in the XCM8800 software:

Configuring the TACACS+ Client for Authentication and 

Authorization

The following sections provide information on configuring the TACACS+ client for TACACS+ 
authentication and authorization:

Before the TACACS+ client software can communicate with a TACACS+ server, you must 
specify the server address in the client software. You can specify up to two TACACS+ 
servers, and you can use either an IP address or a host name to identify each server.

To configure the TACACS+ servers in the client software, use the following command:

configure tacacs [primary | secondary] server [<ipaddress> | <hostname>] 

{<tcp_port>} client-ip <ipaddress> {vr <vr_name>}

To configure the primary TACACS+ server, specify 

primary

. To configure the secondary 

TACACS+ server, specify 

secondary

.