Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH 사용자 설명서

The configuration commands for switch B are as follows:

configure vlan vlan1 ipaddress 192.168.1.5/24

create vrrp vlan vlan1 vrid 1

configure vrrp vlan vlan1 vrid 1 add 192.168.1.3

enable vrrp

Fully Redundant VRRP Network

You can use two or more VRRP-enabled switches to provide a fully redundant VRRP 
configuration on your network. 

 shows a fully redundant VRRP configuration.

In 

, switch A is configured as follows:

IP address 192.168.1.3

Master router for VRID 1

Backup router for VRID 2

MAC address 00-00-5E-00-01-01

Switch B is configured as follows:

IP address 192.168.1.5

Master router for VRID 2

Backup router for VRID 1

MAC address 00-00-5E-00-01-02

Both virtual routers are simultaneously operational. The traffic load from the four hosts is split 
between them. Host 1 and host 2 are configured to use VRID 1 on switch A as their default 
gateway. Host 3 and host 4 are configured to use VRID 2 on switch B as their default 

EX_069

Default Route

Switch A

Master for virtual IP 192.168.1.3
Master VRID = 1
Backup for virtual IP 192.168.1.5
Backup VRID = 2
MAC address = 00-00-5E-00-01-01

Switch B

Master for virtual IP 192.168.1.5
Master VRID = 2
Backup for virtual IP 192.168.1.3
Backup VRID = 1
MAC address = 00-00-5E-00-01-02

Backup Route