Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH 사용자 설명서
Chapter 20. IPv4 Unicast Routing
|
615
NETGEAR 8800 User Manual
•
enable ospf export [bgp | direct | e-bgp | i-bgp | rip | static | isis |
isis-level-1 | isis-level-1-external | isis-level-2 | isis-level-2-external]
[cost <cost> type [ase-type-1 | ase-type-2] {tag <number>} | <policy-map>]
or
disable ospf export [bgp | direct | e-bgp | i-bgp | rip | static | isis |
isis-level-1| isis-level-1-external | isis-level-2 | isis-level-2-external]
Verifying the Routing Configuration
The following sections describe ways to view the routing configuration:
Viewing IP Routes
Use the
show iproute
command to display the current configuration of IP unicast routing for
the switch and for each VLAN. The
show iproute
command displays the currently configured
routes and includes how each route was learned.
Viewing the IP ARP Table
To view the IP ARP table entries, use the
show iparp
command.
Viewing IP ARP Statistics
To view IP ARP table statistics, use the following commands:
show iparp stats [[ <vr_name> | vr {all | <vr_name>} ] {no-refresh} | {vr}
summary]
show iparp stats [vlan {all {vr <vr_name>}} | {vlan} <vlan_name>] {no-refresh}
show iparp stats ports {all | <port_list>} {no-refresh}
Viewing the IP Configuration for a VLAN
To view the IP configuration for one or more VLANs, use the
show ipconfig
command.
Viewing Compressed Routes
View a compressed route using the following command: