Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH 사용자 설명서

# MSDP configuration

config msdp originator-id 10.172.168.61

create msdp peer 10.172.168.32

enable msdp peer 10.172.168.32

enable msdp

Configuring an MSDP Mesh-Group

 shows an example MSDP mesh group configuration.

In this example:

MSDP 1, MSDP 2, and MSDP 3 are configured in a mesh-group called M1.

When the SA message is received at MSDP 1 on interface 10.1.1.1, MSDP 1 floods the 

message to MSDP 2 and MSDP 3.

MSDP 2 inserts the SA message, but the message is not forwarded to MSDP 3 because 

it is in the same mesh-group.

MSDP 3 inserts the SA message, but the message is not forwarded to MSDP 2 because 

it is in the same mesh-group.

As this examples shows, a mesh-group limits the flooding of SA messages to neighboring 
peers in the mesh-group.

In the configurations, loopback VLANs are used as the MSDP peer addresses. This is the 
recommended practice for MSDP. The same can be configured for the originator RP address 
also (CBSR and CRP also can be used as the loopback IP addresses).

EX_msdp_0001

10.1.1.1

10.0.3.3

10.0.3.1

10.0.2.2

10.0.2.3

10.0.1.1

10.1.1.1

10.0.1.2

MESH M1

10.1.1.1

MSDP2

MSDP3

MSDP1