Netgear M5300-52G (GSM7252S) - ProSAFE 48-port Gigabit L2+ Managed Stackable Switch 소프트웨어 가이드
Utility Commands
269
M5300, M6100, and M7100 Series ProSAFE Managed Switches
debug authentication
This command displays either the debug trace for either a single event or all events for an
interface.
interface.
Note:
To display the debug trace, enable the
command.
debug auto-voip
Use this command to enable Auto VoIP debug messages. Use the optional parameters to
trace H323, SCCP, SIP, OUI packets respectively.
trace H323, SCCP, SIP, OUI packets respectively.
Note:
To display the debug trace, enable the
command.
no debug auto-voip
Use this command to disable Auto VOIP debug messages.
debug clear
This command disables all previously enabled “debug” traces.
Note:
To display the debug trace, enable the
command.
debug console
This command enables the display of “debug” trace output on the login session in which it is
executed. Debug console display must be enabled in order to view any trace output. The
output of debug trace commands will appear on all login sessions for which debug console
has been enabled. The configuration of this command remains in effect for the life of the login
session. The effect of this command is not persistent across resets.
executed. Debug console display must be enabled in order to view any trace output. The
output of debug trace commands will appear on all login sessions for which debug console
has been enabled. The configuration of this command remains in effect for the life of the login
session. The effect of this command is not persistent across resets.
Default
none
Format
debug authentication packet {all | event} interface unit/slot/port
Mode
Privileged EXEC
Default
disabled
Format
debug auto-voip [H323 | SCCP |SIP | oui]
Mode
Privileged EXEC
Format
no debug auto-voip
Mode
Privileged EXEC
Default
disabled
Format
debug clear
Mode
Privileged EXEC