Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼

Click the Apply button.

Your settings are saved. The new static route is added to the List of IPv6 Static Routes 
table on the Static Routing screen for IPv6.

The following procedure describes how to change an existing IPv6 static route.



On your computer, launch an Internet browser.

In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.

The VPN firewall factory default IP address is 192.168.1.1.

The NETGEAR Configuration Manager Login screen displays.

In the Username field, type your user name and in the Password / Passcode field, type 
your password.

For the default administrative account, the default user name is admin and the default 
password is password.

If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.

If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.

Click the Login button.

The Router Status screen displays.

Select Network Configuration > Routing.

The Static Routing screen displays the IPv4 settings.

In the upper right, select the IPv6 radio button. 

The Static Routing screen displays the IPv6 settings.

In the List of IPv6 Static Routes table, click the Edit button for the route that you want to 
change.

Interface

From the menu, select the physical or virtual network interface (the WAN1 or 
WAN2 interface, a sit0 Tunnel, LAN interface, or DMZ interface) through which the 
route is accessible.

IPv6 Gateway

The gateway IPv6 address through which the destination host or network can be 
reached.

Metric

The priority of the route. Select a value between 2 and 15. If multiple routes to the 
same destination exist, the route with the lowest metric is used.