Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼

The SSL VPN Connection Status table lists each active connection with the information 
that is described in the following table.

To disable an active SSL user, in the SSL VPN Connection Status table, click the 
corresponding Disconnect button.

The user is disconnected.

To disable another active L2TP user, repeat 

The SSL VPN log on the VPN firewall displays notifications and, if errors occur, error 
messages that are detected on the VPN firewall side. If problems occur during the SSL portal 
establishment process, these error messages can help you to determine what the problem is. 
(Misconfigration is the most common problem.)



On your computer, launch an Internet browser.

In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.

The VPN firewall factory default IP address is 192.168.1.1.

The NETGEAR Configuration Manager Login screen displays.

In the Username field, type your user name and in the Password / Passcode field, type 
your password.

For the default administrative account, the default user name is admin and the default 
password is password.

Username

The user name that is associated with the SSL session.

Group

The group to which the user is assigned.

IP address

The IP address from the user is logged in.

Login Time

The time that the user logged in.

Action

The Disconnect button lets you terminate the SSL VPN tunnel connection.

(This button displays only if an active SSL connection exists.)