Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼

In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.

The VPN firewall factory default IP address is 192.168.1.1.

The NETGEAR Configuration Manager Login screen displays.

In the Username field, type your user name and in the Password / Passcode field, type 
your password.

For the default administrative account, the default user name is admin and the default 
password is password.

If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.

If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.

Click the Login button.

The Router Status screen displays.

Select VPN > SSL VPN > SSL VPN Client. 

The SSL VPN Client screen displays the IPv4 settings. 

To remove an IPv6 client route instead of an IPv4 client route, in the upper right, select the 
IPv6 radio button.

The SSL VPN Client screen displays the IPv6 settings. 

In the Configured Client Routes table, to the right of the route that you want to remove, click 
the corresponding Delete button.

The route is removed from the Configured Client Routes table.

The following sections provide information about managing network resource objects for SSL 
port forwarding:

Network resources are groups of IP addresses, IP address ranges, and applications and 
services. By defining resource objects, you can more quickly create and configure network 
policies. You do not need to redefine the same set of IP addresses or address ranges when 
you configure the same access policies for multiple users.