Netgear FVS318N – Prosafe Wireless N VPN Firewall 전단
Net Mode Configuration Commands
66
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
IPv4 DMZ Setup Commands
net dmz ipv4 configure
This command enables, configures, or disables the IPv4 DMZ. After you have issued the net
dmz ipv4 configure
dmz ipv4 configure
command, you enter the net-config [dmz-ipv4] mode, and then you
can configure one keyword and associated parameter or associated keyword at a time in the
order that you prefer.
order that you prefer.
Step 1
Format
Mode
net
Step 2
Format
enable_ldap {Y | N}
ldap_serverip <ipaddress>
ldap_search_base <search base>
ldap_port <number>
Mode
net-config [dmz-ipv4]
net dmz ipv4 configure
enable_dmz {Y | N}
ip_address <ipaddress>
subnet_mask <subnet mask>
dhcp_mode {None | DHCP-Server | DHCP-Relay}
dns_proxy_enable {Y | N}
domain_name <domain name>
starting_ip_address <ipaddress>
ending_ip_address <ipaddress>
primary_dns_server <ipaddress>
secondary_dns_server <ipaddress>
wins_server <ipaddress>
lease_time <hours>
relay_gateway <ipaddress>
Keyword
Associated Keyword to
Select or Parameter to Type
Select or Parameter to Type
Description
enable_dmz
Y
or N
Enables or disables the DMZ.
ip_address
ipaddress
The IP address of the DMZ port.
subnet_mask
subnet mask
The subnet mask of the DMZ port.