Netgear FVS318N – Prosafe Wireless N VPN Firewall 전단

다운로드
페이지 316
Net Mode Configuration Commands
67
 ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Command example:
FVS318N> net dmz ipv4 configure 
net-config[dmz-ipv4]> enable_dmz 
net-config[dmz-ipv4]> ip_address 10.126.32.59 
net-config[dmz-ipv4]> subnet_mask 2525.255.255.0 
net-config[dmz-ipv4]> dhcp_mode None 
net-config[dmz-ipv4]> dns_proxy_enable Y 
net-config[dmz-ipv4]> save
dhcp_mode
None
DHCP-Serves
 or 
DHCP-Relay
Specifies the DHCP mode:
•  None. DHCP is disabled for the DMZ.
•  DHCP-Server. DHCP is enabled for the DMZ. 
You can configure all keywords and parameters 
except the relay_gateway keyword and 
associated parameter.
•  DHCP-Relay. Addresses are assigned in the 
DMZ by a DHCP Relay. Configure the 
relay_gateway
 keyword and associated 
parameter.
dns_proxy_enable 
Y
 or N 
Enables or disables the DNS proxy.
DHCP server
domain_name
domain name
The server domain name (string) or FQDN for the 
DHCP server.
starting_ip_address
ipaddress
The start IP address for the DHCP address pool.
ending_ip_address
ipaddress
The end IP address for the DHCP address pool.
primary_dns_server
ipaddress
The IP address of the primary DNS server in the 
DMZ DHCP configuration.
secondary_dns_server
ipaddress
The IP address of the secondary DNS server in 
the DMZ DHCP configuration.
wins_server
ipaddress
The IP address of the WINS server in the DMZ 
DHCP configuration.
lease_time
hours
The duration in hours for which an IP address is 
leased. 
enable_ldap
Y
 or N 
Enables or disables LDAP.
ldap_serverip
ipaddress
The IP address of the LDAP server.
ldap_search_base
search base
The search base (string) for LDAP
ldap_port
number
The port number for the LDAP server.
DHCP relay
relay_gateway
ipaddress
Set DHCP relay gateway server.
Keyword
Associated Keyword to 
Select or Parameter to Type
Description