Netgear FVS318N – Prosafe Wireless N VPN Firewall 참조 매뉴얼

The wireless VPN firewall integrates a single 2.4 GHz radio and physical access point that 
provides 2.4 GHz 802.11b/g/n connectivity between wired Ethernet networks and 
radio-equipped wireless notebook systems, desktop systems, print servers, and other 
devices. You can configure up to four wireless security profiles and SSIDs, allowing you to 
tailor access and security to a variety of wireless clients.

The wireless VPN firewall provides wireless connectivity to multiple wireless network devices 
within a fixed range or area of coverage—interacting with a wireless network interface card 
(NIC) through an antenna. Typically, an individual in-building wireless access point provides a 
maximum connectivity area of about a 300-foot radius. The wireless VPN firewall can support 
a small group of wireless users—typically 10 to 32 users.

Configure the wireless features according to the order of the following sections:

1. Configure the Basic Radio Settings

2. Configure and Enable Wireless Profiles

(Optional) 

(Optional) 

The range of your wireless connection can vary significantly based on the location of the 
wireless VPN firewall. The latency, data throughput performance, and notebook power 
consumption of wireless adapters also vary depending on your configuration choices.

Failure to follow these guidelines can result in significant performance 
degradation or inability to wirelessly connect to the wireless VPN 
firewall. For complete performance specifications, see the Data Sheet 
at 

For best results, place your wireless VPN firewall according to the following general 
guidelines:

Near the center of the area in which your wireless devices will operate.

In an elevated location such as a high shelf where the wirelessly connected devices have 
line-of-sight access (even if through walls).

Away from sources of interference, such as computers, microwaves ovens, and 2.4-GHz 

cordless phones.

Away from large metal surfaces or water.