Netgear FVS318N – Prosafe Wireless N VPN Firewall 참조 매뉴얼
Wireless Configuration and Security
109
ProSAFE Wireless-N 8-Port Gigabit VPN Firewall FVS318N
•
Placing the antennas in a vertical position provides the best side-to-side coverage.
Placing the antennas in a horizontal position provides the best up-and-down coverage.
Placing the antennas in a horizontal position provides the best up-and-down coverage.
•
If you are using multiple wireless access points, configure access points to use different
radio frequency channels to reduce interference. The recommended channel space
between adjacent access points is five channels (for example, use channels 1 and 6, or 6
and 11, or 1 and 11).
radio frequency channels to reduce interference. The recommended channel space
between adjacent access points is five channels (for example, use channels 1 and 6, or 6
and 11, or 1 and 11).
•
The time it takes to establish a wireless connection can vary depending on both your
security settings and placement. WEP connections can take slightly longer to establish.
security settings and placement. WEP connections can take slightly longer to establish.
Also, WEP encryption can consume more battery power on a notebook computer.
Configure the Basic Radio Settings
The radio settings apply to all wireless profiles on the wireless VPN firewall. The default
wireless mode is 802.11ng. You can change the wireless mode, country, and many other
radio settings on the Radio Settings screen (described in this section) and on the Advanced
Wireless screen (see
wireless mode is 802.11ng. You can change the wireless mode, country, and many other
radio settings on the Radio Settings screen (described in this section) and on the Advanced
Wireless screen (see
126). The default radio
settings should work well for most configurations.
To configure the basic radio settings:
1.
Select Network Configuration > Wireless Settings > Radio Settings. The Radio
Settings screen displays:
Settings screen displays:
Figure 55.