Netgear FVS318N – Prosafe Wireless N VPN Firewall 참조 매뉴얼
Virtual Private Networking Using IPSec and L2TP Connections
260
ProSAFE Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 157.
3.
From the client computer, ping a computer on the wireless VPN firewall LAN.
Modify or Delete a Mode Config Record
Note:
Before you modify or delete a Mode Config record, make sure that it
is not used in an IKE policy.
is not used in an IKE policy.
To edit a Mode Config record:
1.
On the Mode Config screen (see
245), click the Edit button in the
Action column for the record that you want to modify. The Edit Mode Config Record
screen displays. This screen is identical to the Add Mode Config Record screen (see
246).
2.
Modify the settings as described in
246.
3.
Click Apply to save your settings.
To delete one or more Mode Config records:
1.
On the Mode Config screen (see
left of each record that you want to delete, or click the Select All table button to select
all records.
all records.
2.
Click the Delete table button.
Configure Keep-Alives and Dead Peer Detection
•
•
In some cases, you might not want a VPN tunnel to be disconnected when traffic is idle, for
example, when client-server applications over the tunnel cannot tolerate the tunnel
establishment time. If you require a VPN tunnel to remain connected, you can use the
keep-alive and Dead Peer Detection (DPD) features to prevent the tunnel from being
disconnected and to force a reconnection if the tunnel disconnects for any reason.
example, when client-server applications over the tunnel cannot tolerate the tunnel
establishment time. If you require a VPN tunnel to remain connected, you can use the
keep-alive and Dead Peer Detection (DPD) features to prevent the tunnel from being
disconnected and to force a reconnection if the tunnel disconnects for any reason.