Netgear WNHD3004 – RangeMax Wireless Access Point 사용자 설명서

6-8

Using Network Management Tools

To save your settings, click Back Up. Your browser extracts the configuration file from the bridge 
and prompts you for a location on your computer to store the file. You can give the file a 
meaningful name at this time, such as comcast.cfg.

To restore your settings from a saved configuration file, enter the full path to the file on your 
computer, or click Browse to browse to the file. When you have located it, click Restore to send 
the file to the router. The router then reboots automatically.

Under some circumstances (for example, if you move the router to a different network or if you 
have forgotten the password) you might want to erase the configuration and restore the factory 
default settings. After an erase, the unit’s password is password.

To erase the configuration, click the Erase button in the Settings Backup screen.

To restore the factory default configuration settings when you do not know the login password or 
IP address, you must use the Restore Factory Settings button on the rear panel of the router (see 

The software (also called firmware) of the home theater adapter is stored in flash memory, and can 
be upgraded as NETGEAR releases new software. Your unit can download and install the new 
software.

Tip: Before saving your configuration file, change the administrator password to the 

default, password. Then change it again after you have saved the configuration file. 
If you forget the password, you will need to reset the configuration to factory 
defaults.

Warning: Do not interrupt the reboot process.