Netgear WNHD3004 – RangeMax Wireless Access Point 사용자 설명서

7-2

Troubleshooting

•

The Internet status light on the wireless range extender is on if the Ethernet cable connecting 
the wireless range extender and the network is plugged in securely and the WNHD3004 is 
turned on. 

•

Be sure the LED On/Off button on the back panel is set to On so that you can monitor the 
status lights. 

•

For a wirelessly connected computer, the wireless network name (SSID) and WEP or WPA 
security settings of the WNHD3004 and wireless device must match exactly. 

•

If you have enabled the wireless range extender to restrict wireless access by MAC address, 
you must add the wireless device’s MAC address to the Access Point’s Wireless Station 
Access List.

Wired and wirelessly connected computers must have network (IP) addresses on the same network 
as the WNHD3004. The simplest way to do this is to configure each device to obtain an IP address 
automatically using DHCP. Click the link to the online document 

, or see the documentation that came with your computer.

If the Power and other lights are off when your unit is turned on:

•

Make sure that the power cord is correctly connected and that the power adapter is correctly 
connected to a functioning power outlet, and its Power On/Off button is in the On position. 

•

Check that you are using the power adapter that NETGEAR supplied for this product.

If the error persists, you have a hardware problem and should contact Technical Support at 

.