Netgear FVS318Gv2 – ProSAFE VPN Firewall Series 참조 매뉴얼
LAN Configuration
111
NETGEAR ProSAFE VPN Firewall FVS318G v2
3.
Select the IPv6 radio button.
The DMZ Setup screen displays the IPv6 settings.
4.
Click the RADVD option arrow.
5.
Select the check box to the left of each advertisement prefix that you want to delete or click
the Select All table button to select all advertisement prefixes.
6.
Click the Delete table button.
The information is deleted.
Manage Static IPv4 Routing
Static routes provide additional routing information to your VPN firewall. Under normal
circumstances, the VPN firewall is provided with adequate routing information after it is
configured for Internet access, and you do not need to configure additional static routes.
Configure static routes only for unusual cases such as multiple firewalls or multiple IP
subnets on your network.
circumstances, the VPN firewall is provided with adequate routing information after it is
configured for Internet access, and you do not need to configure additional static routes.
Configure static routes only for unusual cases such as multiple firewalls or multiple IP
subnets on your network.
The VPN firewall automatically sets up routes between VLANs and secondary IPv4
addresses that you configured on the LAN Multi-homing (IPv4) screen. For more information,
see
addresses that you configured on the LAN Multi-homing (IPv4) screen. For more information,
see
Therefore, you do not need to manually add an IPv4 static route between a VLAN and a
secondary IPv4 address.
secondary IPv4 address.
This section contains the following topics:
•
•
•
Configure Static IPv4 Routes
To add an IPv4 static route to the Static Route table:
1.
Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
login time-out, you are automatically logged out.