Netgear FVS318Gv2 – ProSAFE VPN Firewall Series 참조 매뉴얼

In the Add Port Triggering Rule section, enter the settings as described in the following table:

Click the Add table button. 

The new port triggering rule is added to the Port Triggering Rules table.



Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.

The NETGEAR Configuration Manager Login screen displays. 

b.  In the Username field, enter admin and in the Password / Passcode field, enter 

password.

Use lowercase letters. If you changed the password, enter your personalized 
password. Leave the domain as it is (geardomain).

c.  Click the Login button.

The Router Status screen displays. After five minutes of inactivity, which is the default 
login time-out, you are automatically logged out.

Select Security > Port Triggering. 

The Port Triggering screen displays.

In the Port Triggering Rules table to the right of the port triggering rule that you want to edit, 

click the Edit table button.

The Edit Port Triggering Rule screen displays.

Modify the settings that you wish to change.

See 

Name

A descriptive name of the rule for identification and management purposes.

Enable

From the list, select Yes to enable the rule. (You can define a rule but not enable it.) 
The default setting is No.

Protocol

From the list, select the protocol to which the rule applies:

TCP.  The  rule  applies  to  an  application  that  uses  the  Transmission  Control 
Protocol  (TCP).

UDP. The rule applies to an application that uses the User Datagram Protocol 
(UDP).

Outgoing Ports

Start Port

The start port (1–65535) of the range for triggering.

End Port

The end port (1–65535) of the range for triggering.

Incoming Ports

Start Port

The start port (1–65535) of the range for responding.

End Port

The end port (1–65535) of the range for responding.