Netgear FVS318Gv2 – ProSAFE VPN Firewall Series 참조 매뉴얼
Virtual Private Networking Using IPSec and L2TP Connections
234
NETGEAR ProSAFE VPN Firewall FVS318G v2
Test the Connection and View Connection and Status
Information
Information
Both the NETGEAR ProSafe VPN Client and the VPN firewall provide VPN connection and
status information. This information is useful for verifying the status of a connection and
troubleshooting problems with a connection.
status information. This information is useful for verifying the status of a connection and
troubleshooting problems with a connection.
This section contains the following topics:
•
•
•
•
Test the NETGEAR VPN Client Connection
You can establish a connection in many ways. The following procedures assume that you use
the default authentication phase name
the default authentication phase name
Gateway and the default IPSec configuration name
Tunnel. If you manually set up the connection and changed the names, use vpn_client (or
any other name that you configured) as the authentication phase name and
netgear_platform
(or any other name that you configured) as the IPSec configuration name.
To establish a connection, use one of the following three methods:
•
Use the Configuration Panel screen. In the tree list pane of the Configuration Panel
screen, perform
screen, perform
one of the following tasks:
-
Click the Tunnel IPSec configuration name, and press Ctrl+O.
-
Right-click the Tunnel IPSec configuration name, and select Open tunnel.
•
Use the Connection Panel screen. On the main menu of the Configuration Panel
screen, select Tools > Connection Panel to open the Connection Panel screen. Perform
screen, select Tools > Connection Panel to open the Connection Panel screen. Perform
one of the following tasks:
-
Double-click Gateway-Tunnel.
-
Right-click Gateway-Tunnel, and select Open tunnel.