Netgear WG302v1 - ProSAFE 54 Mbps Wireless Access Point 참조 매뉴얼

2-14

Basic Installation and Configuration

5. Under Security on the main menu, select Security Profile Settings. Profile 1 is enabled by 

default; the default SSID is NETGEAR with Security set to Open Systems (see 

 to configure a profile).

6. Click Apply to save your changes.

7. Configure and test your PCs for wireless connectivity. 

Program the wireless adapter of your PCs to have the same SSID and channel that you 
configured in the WG302. Check that they have a wireless link and are able to obtain an IP 
address by DHCP from the WG302.

Once your PCs have basic wireless connectivity to the WG302, you can configure the advanced 
wireless security functions.

Security profiles let you configure unique security settings for each SSID. The WG302 supports 
up to eight SSIDs. The Security Profile Settings menu is shown below in 

An overview of the information that is required to set up a Security Profile follows—including a 
description of the Network Authentication choices that are available:

•

Security Profile Name. Use a name that makes it easy to recognize the profile—and to tell 
profiles apart. (The default names are Profile1, Profile 2, and so on.) You can enter a value of 
up to 32 alphanumeric characters. 

Note: The SSID of any wireless access adapters must match the SSID you configure 

in the NETGEAR ProSafe 802.11g Wireless Access Point . If they do not 
match, you will not get a wireless connection to the WG302.

Note: If you are configuring the WG302 from a wireless computer and you change 

the SSID, channel, or security settings, you will lose your wireless connection 
when you click Apply. You must then change the wireless settings of your 
computer to match the new settings.

Note: If you plan on using RADIUS Server Settings, set them up first, as described in 

.