Netgear WN203 - ProSAFE® WIRELESS-N SINGLE BAND ACCESS POINT 사용자 설명서

The following table lists the technical specifications of the wireless access point:

802.11b data rates

1, 2, 5.5, and 11 Mbps, and auto-rate capable (referred to as Best)

802.11bg data rates

1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps, and auto-rate capable (referred to as 
Best)

802.11ng MCS index and 
data rates

Data rates for a 20 MHz channel width and an automatic guard interval:

0 / 7.2 Mbps, 1 / 14.4 Mbps, 2 / 21.7 Mbps, 3 / 28.9 Mbps, 4 / 43.3 Mbps,
5 / 57.8 Mbps, 6 / 65 Mbps, 7 / 72.2 Mbps, 8 / 14.44 Mbps, 9 / 28.88 Mbps,
10 / 43.33 Mbps, 11 / 57.77 Mbps, 12 / 86.66 Mbps, 13 / 115.56 Mbps, 
14 / 130 Mbps, 15 / 144.44 Mbps and auto-rate capable (referred to as Best)

Data rates for a 20 MHz channel width and a long guard interval (800 ms):

0 / 6.5 Mbps, 1 / 13 Mbps, 2 / 19.5 Mbps, 3 / 26 Mbps, 4 / 39 Mbps, 5 / 52 Mbps,
6 / 58.5 Mbps, 7 / 65 Mbps, 8 / 13 Mbps, 9 / 26 Mbps, 10 / 39 Mbps, 11 / 52 Mbps,
12 / 78 Mbps, 13 / 104 Mbps, 14 / 117 Mbps, 15 / 130 Mbps and auto-rate capable 
(referred to as Best)

Data rates for a 40 MHz channel width and an automatic guard interval:

0 / 15 Mbps, 1 / 30 Mbps, 2 / 45 Mbps, 3 / 60 Mbps, 4 / 90 Mbps, 5 / 120 Mbps,
6 / 135 Mbps, 7 / 150 Mbps, 8 / 30 Mbps, 9 / 60 Mbps, 10 / 90 Mbps, 11 / 120 Mbps,
12 / 180 Mbps, 13 / 240 Mbps, 14 / 270 Mbps, 15 / 300 Mbps and auto-rate capable 
(referred to as Best)

Data rates for a 40 MHz channel width and a long guard interval (800 ms):

0 / 13.5 Mbps, 1 / 27 Mbps, 2 / 40.5 Mbps, 3 / 54 Mbps, 4 / 81 Mbps, 5 / 108 Mbps,
6 / 121.5 Mbps, 7 / 135 Mbps, 8 / 27 Mbps, 9 / 54 Mbps, 10 / 81 Mbps,
11 / 108 Mbps, 12 / 162 Mbps, 13 / 216 Mbps, 14 / 243 Mbps, 15 / 270 Mbps and 
auto-rate capable (referred to as Best)

802.11b/bg/ng
operating frequencies

2.412–2.472 GHz

802.11 b/bg/ng 
encryption

•

64-bit, 128-bit, and 52-bit WEP

•

AES

•

TKIP

Network management

•

Remote  configuration  and  management  through  the  web  management 
interface, through SNMP, or through Telnet or SSH with the command-line 
interface (CLI).

•

SNMP management supports SNMP MIB I, MIB II, 802.11 MIB, and proprietary 
configuration MIB.

Maximum clients

Limited by the amount of wireless network traffic generated by each node; a 
maximum of 64 clients is supported.