Netgear WN203 - ProSAFE® WIRELESS-N SINGLE BAND ACCESS POINT 사용자 설명서

You can use the Reset to Factory Defaults button located on the bottom panel of the wireless 
access point to reset all settings to their factory default. This is called a hard reset. 

To perform a hard reset, use a sharp object to press and hold the Reset to Factory Defaults 
button for approximately 10 seconds. This returns the wireless access point to the factory 
configuration settings that are shown in the following table.

Pressing the Reset to Factory Defaults button for a few seconds 
simply causes the wireless access point to reboot.

Status LEDs

•

Power  LED

•

Test LED

•

LAN LED

•

WLAN LED

Power adapter

12VDC, 1A; plug is localized to country of sale

Power consumption

4.0W

Physical specifications

•

Dimensions (h x w x d): 35 x 133 x 173 mm (1.4 x 5.3 x 6.8 in.)

•

Weight: 240 g (0.5 lb)

Environmental 
specifications

•

Operating temperature: 0 to 45°C (32 to 113°F)
Operating humidity: 10–90%, noncondensing

•

Storage temperature: –20 to 70°C (–4 to 158°F)
Storage humidity: 5–95%, noncondensing

MTBF

•

At 25°C > 375,000 hours

•

At 50°C > 125,000 hours

Electromagnetic 
compliance

SRRC