Netgear WN203 - ProSAFE® WIRELESS-N SINGLE BAND ACCESS POINT 사용자 설명서



Select Configuration > System > Advanced > General. 

The advanced General system settings screen displays:

Specify the settings as described in the following table:

Click the Apply button.

If the wireless access point functions as a public access point and you want it to capture and 
redirect all HTTP requests (over TCP, port 80), set up a hotspot server to redirect the 
requests to the specified URL and manage the clients. For example, you can redirect HTTP 
requests to a web server for authentication, timing control, or advertising. A hotel might want 
all wireless connections to go to its server to start a billing transaction.

Spanning Tree Protocol Select the Enable radio button to enable STP to prevent path redundancy. By 

default, the Disable radio button is selected.

Untagged VLAN

Select the Untagged VLAN check box to configure one VLAN as an untagged 
VLAN. By default, the Untagged VLAN check box is selected.

Specify a VLAN ID. The default VLAN ID is 1.

Management VLAN

Specify an ID for the VLAN from which the wireless access point can be 
managed. The default VLAN ID is 1. 

If you configure the management VLAN ID as 0 (zero), the wireless access 

point can be managed over any VLAN, and frames that belong to the 
management VLAN are not tagged with an 802.1Q header when sent over the 
trunk.