Netgear WN203 - ProSAFE® WIRELESS-N SINGLE BAND ACCESS POINT 사용자 설명서
Advanced Configuration
70
ProSAFE Single Band 802.11n Wireless Access Point WN203
Note:
The redirection occurs only the first time that a wireless client opens
a web browser.
a web browser.
To set up a hotspot server:
1.
Select Configuration > System > Advanced > Hotspot.
The Hotspot screen displays:
2.
To enable HTTP redirection, select the Enable radio button.
By default, HTTP redirection is disabled.
3.
In the Redirect URL field, enter the URL of the web server to which you wish to redirect
HTTP requests.
HTTP requests.
4.
Click the Apply button.
All HTTP requests are now redirected to the specified URL.
Configure Advanced Wireless Settings
Use the advanced Wireless Settings screen to configure and enable various WLAN settings
for the 802.11b/bg/ng modes.
for the 802.11b/bg/ng modes.
The default WLAN settings normally work well. However, you can use the advanced settings
to fine-tune the overall performance of the wireless access point for your specific
environment. If a radio is turned off, you cannot configure the advanced wireless settings.
Make sure that the radio is turned on.
to fine-tune the overall performance of the wireless access point for your specific
environment. If a radio is turned off, you cannot configure the advanced wireless settings.
Make sure that the radio is turned on.
To configure the advanced wireless settings:
1.
Select Configuration > Wireless > Advanced > Wireless Settings.
The advanced Wireless Settings screen displays. The following figure shows the 11ng
settings, as indicated by the radio wave icon (
settings, as indicated by the radio wave icon (
) that is displayed next to ng: