Netgear WN802T - Wireless-N Access Point 참조 매뉴얼

2-1

This chapter describes how to set up your RangeMax NEXT Wireless-N Access Point for wireless 
connectivity to your LAN. This basic configuration will enable computers with 802.11b/g/Next or 
802.11b/g wireless adapters to connect to the Internet, or access printers and files on your LAN.

You need to prepare these three things before you can establish a connection through your wireless 
access point:

•

A location for the WN802T that conforms to the 

 below.

•

The wireless access point connected to your LAN through a device such as a hub, switch, 
router, or Cable/DSL gateway. 

•

One or more computers with properly configured 802.11b/g/Next or 802.11b/g wireless 
adapters.

The operating distance or range of your wireless connection can vary significantly based on the 
physical placement of the wireless access point. The latency, data throughput performance, and 
notebook power consumption of wireless adapters also vary depending on your configuration 
choices.

Note: Indoors, computers can connect over 802.11b/g/Next or 802.11b/g wireless 

networks at ranges of several hundred feet or more. This distance can allow for 
others outside your area to access your network. It is important to take appropriate 
steps to secure your network from unauthorized access. The RangeMax NEXT 
provides highly effective security features which are covered in detail in 

. Deploy the 

security features appropriate to your needs