Netgear WAG302v2- ProSAFE Dual Band Wireless Access Point 참조 매뉴얼
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
Command Line Reference
C-19
v1.0, May 2006
Advanced Access Point Settings
The commands in
correspond to the Access Point Settings page on the Web UI under
the Advanced heading.
Set cwMin and cwMax
on
station-to-AP traffic
set wme-queue wlan0 with queue <Queue_Name>
to cwmin <cwmin_Value> cwmax <cwmax_Value>
Example
:
set wme-queue wlan0 with queue vi cwmin 7 cwmax 15
Set TXOP Limit
on station-
to-AP traffic
set wme-queue wlan0 with queue <Queue_Name>
to txop-limit <txop-limit_Value>
Example
:
set wme-queue wlan0 with queue vo to txop-
limit 49
Table C-17 Advanced Access Point Settings
Task
Command
Enable Wireless Bridging and
Repeating
Repeating
set interface wlan0wds0 status up
set interface wlan0wds0 radio wlan0
Disable Wireless Bridging and
Repeating
Repeating
set interface wlan0wds0 status down
View the Local MAC Address for
the Wireless Bridge or Repeater
the Wireless Bridge or Repeater
get interface wlan0wds0 mac
Set the Remote MAC Address 1
set interface wlan0wds0 remote-mac
<remote_MAC_address>
Set the Remote MAC Address 2
set interface wlan0wds1 remote-mac
<remote_MAC_address>
Set the Remote MAC Address 3
set interface wlan0wds2 remote-mac
<remote_MAC_address>
Set the Remote MAC Address 4
set interface wlan0wds3 remote-mac
<remote_MAC_address>
Table C-16 Advanced Wireless Settings (continued)
Task
Command