Netgear WAG302v2- ProSAFE Dual Band Wireless Access Point 참조 매뉴얼

3-2

Management and Information

To access the Remote Management screen: 

1. Enter the LAN address of the WAG302v2 into the address field of your browser.

2. After you log in, click Remote Management under Management on the main menu.

3. Enter the Remote Management information.

•

Secure Shell (SSH): If set to Enable, the Wireless Access Point will only allow remote 
access via Secure Shell and Secure Telnet. The default is Enable.

•

SNMP: Enable SNMP to allow the SNMP network management software, such as HP 
OpenView, to manage the wireless access point via SNMPv1/v2 protocol. 

•

Public Community Name: The community string to allow the SNMP manager to read the 
wireless access point's MIB objects. The default is public.

•

Private Community Name: The community string to allow the SNMP manager to read 
and write the wireless access point's MIB objects. The default is private.

•

Community Name for Traps: The community string associated with the IP address to 
Receive Traps. There is no default value.

•

IP address to Receive Traps: The IP address of the SNMP manager to receive traps sent 
from the wireless access point. The default is 0.0.0.0.

4. Click Apply to save your settings.