Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs 소프트웨어 가이드

The next Scheduled Replicate screen displays.

(Optional) Configure the settings on the screen as explained in the following table:

New Share/LUN Name

Lists the name of the share or LUN selected earlier.

Show Progress

Select the check box to view the progress of the data transfer.

Compression

Select the check box to enable data compression during the data transfer. Then 
configure the compression rate. By default, compression is disabled.

After the data has been transferred, the data is not stored compressed 

unless it was already compressed on the source share or LUN.

Compression Level Set the compression level by clicking the up or down arrows 

to increase or decrease the level. You can select from 1 
through 9. For example, 5 indicates that data is compressed 
five times.

Encryption

Select the check box to enable encryption. By default, encryption is disabled.

NETGEAR recommends that you encrypt sensitive data.

If you do not use an explicit destination IP address, data that is replicated 

over the Internet is automatically encrypted for increased safety. When you select 
the Encryption check box, data that is replicated over the Internet is encrypted 
twice.