Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs 소프트웨어 가이드
Backup, Replication, and Recovery
206
ReadyDATA OS 1.4
Deduplication
Select the check box to enable deduplication during the data transfer.
Deduplication prevents transfer of redundant data and increases the speed of the
data transfer.
Deduplication prevents transfer of redundant data and increases the speed of the
data transfer.
Note:
After the data has been transferred, the data is not stored in a deduplicated
format unless it was already deduplicated on the source share or LUN.
Use P2P Service
Select the check box to enable point-to-point data transmission. This check box is
selected by default. If P2P is not selected, data is transmitted to the ReadyDATA
Replicate site from the source and then transmitted to the destination site. If the
check box is selected, transmission is from the source to the destination without
going through the ReadyDATA replicate site.
selected by default. If P2P is not selected, data is transmitted to the ReadyDATA
Replicate site from the source and then transmitted to the destination site. If the
check box is selected, transmission is from the source to the destination without
going through the ReadyDATA replicate site.
Explicit IP Address
ReadyDATA Replicate automatically selects the physical Ethernet interfaces and
VNICs for communication between the source and destination systems. If you
want to use a specific interface on the destination system, you can specify its IP
address.
VNICs for communication between the source and destination systems. If you
want to use a specific interface on the destination system, you can specify its IP
address.
To specify a specific interface, enter the IP address of the interface on the
destination system. The address is automatically appended with port number
6819.
destination system. The address is automatically appended with port number
6819.
Note:
You must set up port forwarding if the source and destination are behind a
firewall.
Note:
If you use an explicit destination IP address, data that is replicated over the
Internet is not automatically encrypted. You must select the Encryption check box
to enable encryption.
to enable encryption.
Explicit Domain Name
ReadyDATA Replicate automatically selects the physical Ethernet interfaces and
VNICs for communication between the source and destination systems. If,
instead, you want to use a specific domain name for the destination system, you
can specify it here. The name is automatically appended with port number 6819.
VNICs for communication between the source and destination systems. If,
instead, you want to use a specific domain name for the destination system, you
can specify it here. The name is automatically appended with port number 6819.
Note:
You must set up port forwarding if the source and destination are behind a
firewall.
Note:
If you use an explicit destination domain name, data that is replicated over
the Internet is not automatically encrypted. You must select the Encryption check
box to enable encryption.
box to enable encryption.
P2P FallBack
Select the check box to enable use of transmission through the ReadyDATA
Replicate site if communication problems with P2P transmission occur.
Replicate site if communication problems with P2P transmission occur.
Item
Description