Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs 소프트웨어 가이드

Encryption

Select the check box to enable encryption. By default, encryption is disabled.

NETGEAR recommends that you encrypt sensitive data.

If you do not use an explicit destination IP address, data that is replicated 

over the Internet is automatically encrypted for increased safety. When you select 
the Encryption check box, data that is replicated over the Internet is encrypted 
twice.

Deduplication

Select the check box to enable deduplication during the data transfer. 
Deduplication prevents transfer of redundant data and increases the speed of the 
data transfer.

After the data has been transferred, the data is not stored in a deduplicated 

format unless it was already deduplicated on the source share or LUN.

Explicit Destination IP 

Address

ReadyDATA Replicate automatically selects the physical Ethernet interfaces and 
VNICs for communication between the source and destination systems. If you 
want to use a specific interface on the destination system, you must specify its IP 
address.

To specify a specific interface, select the check box to enable an explicit 
destination IP address. Then configure the IP address.

You must set up port forwarding if the source and destination are behind a 

firewall.

If you use an explicit destination IP address, data that is replicated over the 

Internet is not automatically encrypted. You must select the Encryption check box 
to enable encryption.

IP Address

Enter the IP address of the interface on the destination 
system. The address is automatically appended with port 
number 6819.