Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs 软件指南
Backup, Replication, and Recovery
215
ReadyDATA OS 1.4
Encryption
Select the check box to enable encryption. By default, encryption is disabled.
Note:
NETGEAR recommends that you encrypt sensitive data.
Note:
If you do not use an explicit destination IP address, data that is replicated
over the Internet is automatically encrypted for increased safety. When you select
the Encryption check box, data that is replicated over the Internet is encrypted
twice.
the Encryption check box, data that is replicated over the Internet is encrypted
twice.
Deduplication
Select the check box to enable deduplication during the data transfer.
Deduplication prevents transfer of redundant data and increases the speed of the
data transfer.
Deduplication prevents transfer of redundant data and increases the speed of the
data transfer.
Note:
After the data has been transferred, the data is not stored in a deduplicated
format unless it was already deduplicated on the source share or LUN.
Explicit Destination IP
Address
ReadyDATA Replicate automatically selects the physical Ethernet interfaces and
VNICs for communication between the source and destination systems. If you
want to use a specific interface on the destination system, you must specify its IP
address.
VNICs for communication between the source and destination systems. If you
want to use a specific interface on the destination system, you must specify its IP
address.
To specify a specific interface, select the check box to enable an explicit
destination IP address. Then configure the IP address.
destination IP address. Then configure the IP address.
Note:
You must set up port forwarding if the source and destination are behind a
firewall.
Note:
If you use an explicit destination IP address, data that is replicated over the
Internet is not automatically encrypted. You must select the Encryption check box
to enable encryption.
to enable encryption.
IP Address
Enter the IP address of the interface on the destination
system. The address is automatically appended with port
number 6819.
system. The address is automatically appended with port
number 6819.
Item
Description