Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs 소프트웨어 가이드
Configure the System Settings
59
ReadyDATA OS 1.4
7.
Click the TCP/IP tab.
The IP settings display. The IPv4 and IPv6 settings are mutually exclusive.
8.
Select whether to use IPv4 or IPv6.
When you select a configuration method from the Configure IPv4 drop-down list, the
IPv6 settings are dimmed; when you select a configuration method from the Configure
IPv6 drop-down list, the IPv4 settings are dimmed.
IPv6 settings are dimmed; when you select a configuration method from the Configure
IPv6 drop-down list, the IPv4 settings are dimmed.
The following figure shows the IPv4 settings; the next figure shows the IPv6 settings.
VLAN ID
Enter a VLAN ID. The default setting ID is 0.
Note:
If you use VLAN IDs, the switch to which you connect the ReadyDATA must
support VLAN tagging.
Bandwidth Limit (Mbps) Enter the bandwidth limit in Mbps. Depending on the Ethernet interfaces that are
installed in the ReadyDATA, the maximum limit is either 1,000 Mbps or
10,000
10,000
Mbps.
Item
Description