Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs 소프트웨어 가이드

NETGEAR recommends that you use DHCP address reservation to 
make sure that the DHCP server always assigns the same IP address 
to the interfaces of the ReadyDATA. The MAC addresses of the 
physical interfaces and VNICs are shown on the Network screen.

For IPv4 settings, you can select (or clear) the Primary Router check box to make this 
VNIC the primary route for data to and from the ReadyDATA.

Click the DNS tab. 

The DNS settings display:

To add a DNS server, click the + button.

Enter an IP address.

Click the Add button. 

Router

Enter the IPv6 address for the ReadyDATA.

Manual 
configuration 
only

IPv6 Address

Enter the prefix length for the ReadyDATA. The default address is ::1 
(that is, 0::1).

Prefix Length

Enter the IPv6 address for the router through which the ReadyDATA 
connects to your network. The default prefix length is 128. You can 
specify a prefix length by appending /prefix length, for example, /64, 
when you specify the IP address.