Netgear WAC720- ProSAFE® Business 2 x 2 Dual Band Wireless-AC Access Point 사용자 설명서

The web browser displays the General page under the Configuration tab. If you are 
using the access point as a standalone access point or as an access point with a wireless 
controller, you must disable the cloud mode (see 

After you disable the cloud mode and you log in to the access point, the web browser 

displays the Dashboard page under the Monitoring tab of the main menu. For more 
information, see 

The navigation tabs across the top of the web management interface provide access to all 
the configuration functions of the access point and remain constant. The menu items in the 
blue bar change according to the navigation tab that is selected.

The top right corner of all pages that allow you to make configuration changes show the 
Apply and Cancel buttons, and on several pages the Edit button.

These buttons provide the following functions:

Edit. Allows you to edit the existing configuration.

Cancel. Cancels all configuration changes that you made on the page.

Apply. Saves and applies all configuration changes that you made on the page.

When the access point runs firmware version 3.5.6.0 or a later version, by default, the cloud 
mode is enabled for the access point and the web management interface is a restricted 
interface that shows only the Configuration and Monitoring menu tabs with limited 
configuration options.

If you are using the access point as a standalone access point or as an access point with a 
wireless controller, you must disable the cloud mode.



Open a web browser from a computer that is connected to the same network as the 
access point or to the access point directly through an Ethernet cable.

In the address bar, enter the IP address of the access point.

A login window opens.

Enter the user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.