Netgear WAC720- ProSAFE® Business 2 x 2 Dual Band Wireless-AC Access Point 사용자 설명서
Management and Monitoring
90
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
An Alert pop-up window opens.
The firmware is uploaded to the master access point’s memory.
Note:
The firmware is uploaded to but not upgraded on the master access point.
However, in
However, in
you can select the firmware to be upgraded on the
master access point.
10.
In the Alert pop-up window, click the OK button.
The pop-up window closes. In the Upload Firmware section, a status bar shows the
progress of the upload process. After the upload process is complete, the master access
point restarts.
progress of the upload process. After the upload process is complete, the master access
point restarts.
11.
Log back in to the access point.
12.
Select Maintenance > Ensemble Upgrade > Firmware Upgrade.
13.
In the Member Selection table, select the check boxes for the members of the ensemble
that you want to upgrade, including, if you want, the master access point.
that you want to upgrade, including, if you want, the master access point.
If you want to upgrade firmware on all members of the ensemble, select the check box in
the table heading.
the table heading.
14.
Click the Apply button.
The firmware upgrade process starts.
The Firmware-transfer-status field in the table shows whether the firmware download to
and validation in the member is successful.
and validation in the member is successful.
Monitor an Ensemble
You can monitor the status of an ensemble from the ensemble dashboard. You can also
monitor the devices connected to members of the ensemble as well as monitor networks
neighboring the ensemble.
monitor the devices connected to members of the ensemble as well as monitor networks
neighboring the ensemble.
Monitor the Status of the Ensemble
You can monitor the status of the access point as member of the ensemble, including the
access point’s priority in the ensemble and whether the access point is the master AP in the
ensemble.
access point’s priority in the ensemble and whether the access point is the master AP in the
ensemble.
To monitor the status of the ensemble:
1.
Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
access point or to the access point directly through an Ethernet cable.
2.
In the address bar, enter the IP address of the access point.
A login window opens.
3.
Enter the user name and password.