Netgear GS510TP – ProSAFE 8-Port Gigabit Smart Switch with PoE and 2 fiber SFP ports 관리자 가이드

Smart Control Center Utilities

In addition to device discovery and network address assignment, the Smart Control Center 
includes several maintenance features. This section describes the following Smart Control 
Center utilities:

Network Utilities

From the Network tab, you can perform the following functions: 

DHCP Refresh—Forces the switch to release the current bindings and request new 

address information from the DHCP server.

Reboot Device—Reboots the selected device. 

Web Browser Access—Launches a Web browser and connects to the management 

interface for the selected device.

Configure Device—Allows you to modify network information for the switch, including 

the IP address, DHCP client mode, system name, and location. For more information 
about this feature, see 

Change Password—Allows you to set a new password for the device. For more 

information about this feature, see 

To modify switch information:

Select the switch.

Click Configure Device. Additional fields appear on the screen.

To assign or update a static IP address, default gateway, or subnet mask, disable the DHCP 

client and enter the new information. You can also specify a system name and location for 

the switch.

Type the password in the Current Password field. You cannot apply the changes without a 

valid switch password. The default password for the switch is password.

Click Apply to update the switch with the changes to the network information.