Netgear GS510TP – ProSAFE 8-Port Gigabit Smart Switch with PoE and 2 fiber SFP ports 관리자 가이드
Configuring Switching Information
75
GS510TP and GS110T Gigabit Smart Switches
To configure LACP port priority settings:
1.
Select the check box next to the port to configure. You can select multiple ports to apply
the same setting to all selected ports.
Note:
You cannot select ports that are not participating in a LAG.
2.
Configure the LACP Priority value for the selected port. The field range is 0–255. The
default value is 128.
3.
Configure the administrative LACP Timeout value.
•
Long. Specifies a long timeout value.
•
Short. Specifies a short timeout value.
4.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5.
If you make any changes to this page, click Apply to send the updated configuration to the
switch. Configuration changes take effect immediately.
VLANs
Adding Virtual LAN (VLAN) support to a Layer 2 switch offers some of the benefits of both
bridging and routing. Like a bridge, a VLAN switch forwards traffic based on the Layer 2
header, which is fast, and like a router, it partitions the network into logical segments, which
provides better administration, security and management of multicast traffic.
bridging and routing. Like a bridge, a VLAN switch forwards traffic based on the Layer 2
header, which is fast, and like a router, it partitions the network into logical segments, which
provides better administration, security and management of multicast traffic.