Netgear GS510TP – ProSAFE 8-Port Gigabit Smart Switch with PoE and 2 fiber SFP ports 관리자 가이드
Configuring Switching Information
76
GS510TP and GS110T Gigabit Smart Switches
By default, all ports on the switch are in the same broadcast domain. VLANs electronically
separate ports on the same switch into separate broadcast domains so that broadcast
packets are not sent to all the ports on a single switch. When you use a VLAN, users can be
grouped by logical function instead of physical location.
separate ports on the same switch into separate broadcast domains so that broadcast
packets are not sent to all the ports on a single switch. When you use a VLAN, users can be
grouped by logical function instead of physical location.
Each VLAN in a network has an associated VLAN ID, which appears in the IEEE 802.1Q tag
in the Layer 2 header of packets transmitted on a VLAN. An end station may omit the tag, or
the VLAN portion of the tag, in which case the first switch port to receive the packet may
either reject it or insert a tag using its default VLAN ID. A given port may handle traffic for
more than one VLAN, but it can only support one default VLAN ID.
in the Layer 2 header of packets transmitted on a VLAN. An end station may omit the tag, or
the VLAN portion of the tag, in which case the first switch port to receive the packet may
either reject it or insert a tag using its default VLAN ID. A given port may handle traffic for
more than one VLAN, but it can only support one default VLAN ID.
From the VLAN link, you can access the following pages:
VLAN Configuration
Use the VLAN Configuration page to define VLAN groups stored in the VLAN membership
table. The GS510TP and GS110T each support up to 64 VLANs. Three VLANs are created
by default:
table. The GS510TP and GS110T each support up to 64 VLANs. Three VLANs are created
by default:
•
VLAN 1 is the default VLAN of which all ports are members.
•
VLAN 2 is for voice traffic.
•
VLAN 3 is for Auto-Video traffic.
To display the VLAN Configuration page, lick Switching
> VLAN > Basic > VLAN
Configuration.
To configure VLANs:
1.
To add a VLAN, configure the VLAN ID, name, and type, and then click Add.