Netgear MA111v2 - 11 Mbps Wireless USB Adapter 사용자 설명서

4-6

Configuration

The procedures below identify how to configure the WEP encryption settings of your NETGEAR 
11 Mbps Wireless USB Adapter MA111. 

Print this form, fill in the configuration parameters and put it in a safe place for possible future 
reference. For an existing wireless network, the person who set up the network will be able to 
provide this information.

•

Wireless Network Name (SSID): The Service Set Identification (SSID) identifies the wireless 
local area network. Any (First available network) is the default MA111 wireless network name 
(SSID). You may customize it using up to 32 alphanumeric characters. Write your customized 
wireless network name (SSID) on the line below. 

 The SSID in the wireless access point is the SSID you configure in the wireless USB 

adapter. For the access point and wireless nodes to communicate with each other, all must be 
configured with the same SSID.

Wireless network name (SSID): ______________________________ 

•

WEP Security Encryption key: The default WEP encryption key number is 1, and the default 
key size is 64 bits.

Note: The key number as well as the key value used by all wireless nodes must be the same. If 
they are different, you will not be able to connect.

WEP Encryption Key Size, circle one: 64 or 128 bits

WEP Encryption Passphrase, if used: ____________________________ 

A Passphrase is used to automatically generate the WEP hexadecimal numbers for the key. If 
the wireless network Access Point uses a Passphrase, you can also use that here. Otherwise, 
you will have to manually enter the hexadecimal numbers.

WEP Hexadecimal Numbers: ______________________________ 

The WEP Hexadecimal Numbers are needed if a Passphrase is not used in the wireless 
network access point, but rather if the key is manually entered.

•

WPA Passphrase: ____________________________ 

Use the procedures below to configure security settings in the MA111.