Netgear MA111v2 - 11 Mbps Wireless USB Adapter 사용자 설명서

Configuration

4-7

Follow the steps below to configure WEP Encryption Security.

a.

Make sure the MA111 software is installed and the MA111 is connected to your PC.

b.

Click the 

icon on the Windows desktop or in the system tray to open the Wireless 

Configuration Utility.

a.

Click the Configuration tab. 

b.

Enter the Network Name SSID. This is also called the Wireless Network Name.

Note: You will not get a wireless network connection unless the network SSID matches 
exactly what is configured in the access point. 

Tip: You can select from the drop-down list of the available wireless networks and their 
SSIDs at your location. 

a.

On the Configuration tab, select the Enable Encryption check box.

b.

Select the WEP encryption strength you will use. 

The choices are:

•

64-bit WEP data encryption 

•

128-bit WEP data encryption 

Note: Larger encryption keys require more processing and may slow the communications 
response times.

c.

Select Create with Passphrase and enter the passphrase. The configuration utility 
automatically generates the WEP keys. 

 

 
Note: The characters are case sensitive. Be sure to use the same passphrase for all the 
wireless devices in the network.

If the passphrase method is not available in the other devices, you must manually enter the 
keys to match exactly what is in the access point and other 802.11b wireless devices. The 
Default Key setting must match what is set in the access point and the other 802.11 
wireless devices.