Netgear GS724TP – ProSAFE GS724TP 24-Port Gigabit Smart Switch and PoE 사용자 설명서
GS700TP Smart Switch Software Administration Manual
Configuring Switching Settings
4-39
v1.0, April 2008
•
Activate Protocol Migration – Activate sending Link Control Protocol (LCP) packets to
configure and test that the data link is enabled.
configure and test that the data link is enabled.
2. Select the interface.
3. Select the Point-to-Point Admin Status from the list in the provided field in the first row.
4. To configure and test the data link, check Activate Protocol Migration in the provided field
in the first row.
5. Click APPLY to update the device.
Multicast
Multicast forwarding allows a single packet to be forwarded to multiple destinations. L2 Multicast
service is based on L2 switch receiving a single packet addressed to a specific Multicast address.
Multicast forwarding creates copies of the packet, and transmits the packets to the relevant ports.
service is based on L2 switch receiving a single packet addressed to a specific Multicast address.
Multicast forwarding creates copies of the packet, and transmits the packets to the relevant ports.
•
Registered Multicast traffic – If traffic addressed to a registered Multicast group is seen it is
handled by an entry in the Multicast Filtering Database and forwarded only to the registered
ports.
handled by an entry in the Multicast Filtering Database and forwarded only to the registered
ports.
•
Unregistered Multicast traffic – If traffic addressed to an unregistered Multicast group is
seen it is handled by a special entry in the Multicast Filtering Database. The default setting of
this is to flood all such traffic (traffic in unregistered Multicast groups).
seen it is handled by a special entry in the Multicast Filtering Database. The default setting of
this is to flood all such traffic (traffic in unregistered Multicast groups).
Layer 2 switching forwards Multicast packets to all relevant VLAN ports by default, treating the
packet as a Multicast transmission. Multicast traffic forwarding is functional. However, irrelevant
ports also receive the Multicast, causing increased network traffic. Multicast forwarding filters
enable forwarding of Layer 2 packets to port subsets, defined in the Multicast filter database.
packet as a Multicast transmission. Multicast traffic forwarding is functional. However, irrelevant
ports also receive the Multicast, causing increased network traffic. Multicast forwarding filters
enable forwarding of Layer 2 packets to port subsets, defined in the Multicast filter database.
The device supports forwarding L2 Multicast Packets. Multicast forwarding is enabled by default,
and not configurable by user.
and not configurable by user.
The Multicast menu contains the following options:
•
•
Basic
The Multicast Basic menu contains the following options:
•