Netgear FS728TPv2 - ProSAFE 24 Port 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports 하드웨어 매뉴얼
Chapter 4: Installation
|
21
FS728TP Hardware Installation Guide
Step 4: Connecting Devices to the Switch
The following procedure describes how to connect PCs to the switch’s RJ-45 ports. The
FS728TP contains Auto Uplink technology, which allows the attaching of devices using either
straight-through or crossover cables.
FS728TP contains Auto Uplink technology, which allows the attaching of devices using either
straight-through or crossover cables.
Desktop PC
`
Desktop PC
`
Figure 5. Connecting Devices to the Switch
Connect each PC to an RJ-45 network port on the Switch front panel (
). Use
Category 5 (Cat5) Unshielded Twisted-Pair (UTP) cable terminated with an RJ-45 connector
to make these connections.
to make these connections.
Note:
Ethernet specifications limit the cable length between the
switch and the attached device to 100m (328 ft.).