Netgear M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8*2.5G and 2x10G SFP+ Layer 3 관리자 가이드
DHCPv6 Server
488
Managed Switches
CLI: Set Up a Configuration With a DHCPv6 Server and
DHCPv6 Relay
DHCPv6 Relay
Figure 51. Configuration with a DHCPv6 server and DHCPv6 relay
This is a two-step process:
•
•
Configure the DHCPv6 Server
1.
Enable IPv6 routing.
2.
Create a DHCPv6 pool and enable DHCP service.
(Netgear Switch) (Config)#ipv6 dhcp pool ipv6_server
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#service dhcpv6
(Netgear Switch) (Config)#ipv6 dhcp pool pool1
(Netgear Switch) (Config-dhcp6s-pool)#domain-name netgear.com
(Netgear Switch) (Config-dhcp6s-pool)#address prefix 2001:2::/64
(Netgear Switch) (Config-dhcp6s-pool)#exit
DHCPv6
Server
Server
DHCPv6
Relay
Relay
DHCPv6
Client
Client
1/0/20
1/0/20
1/0/19