Netgear FS728TPv2 - ProSAFE 24 Port 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports 관리자 가이드
Chapter 1: Getting Started
|
19
FS728TP Smart Switch Software Administration Manual
Smart Control Center Utilities
In addition to device discovery and network address assignment, the Smart Control Center
includes several maintenance features. This section describes the following Smart Control
Center utilities:
includes several maintenance features. This section describes the following Smart Control
Center utilities:
Network Utilities
From the Network tab, you can perform the following functions:
•
DHCP Refresh
—Forces the switch to release the current bindings and request new
address information from the DHCP server.
•
Reboot Device
—Reboots the selected device.
•
Web Browser Access
—Launches a Web browser and connects to the management
interface for the selected device.
•
Configure Device
—Allows you to modify network information for the switch, including
the IP address, DHCP client mode, system name, and location. For more information
about this feature, see
about this feature, see
.
•
Change Password
—Allows you to set a new password for the device. For more
Configuring the Device
To modify switch information:
1.
Select the switch.
2.
Click Configure Device. Additional fields appear on the screen.
3.
To assign or update a static IP address, default gateway, or subnet mask, disable the DHCP
client and enter the new information. You can also specify a system name and location for
the switch.
4.
Type the password in the Current Password field. You cannot apply the changes without a
valid switch password. The default password for the switch is password.
5.
Click Apply to update the switch with the changes to the network information.