Netgear FS728TPv2 - ProSAFE 24 Port 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports 관리자 가이드
214
|
Chapter 7: Maintenance
FS728TP Smart Switch Software Administration Manual
Reset
The Reset menu contains links to the following options:
Device Reboot
Use the Device Reboot page to reboot the FS728TP.
To access the Device Reboot page, click Maintenance
Reset Device Reboot.
To reboot the switch:
1.
Select the check box on the page.
2.
Click Apply. The switch resets immediately. The management interface is not available until
the switch completes the boot cycle. After the switch resets, the login screen appears.
Factory Default
Use the Factory Default page to reset the system configuration to the factory default values.
Note:
If you reset the switch to the default configuration, the IP address is
reset to 192.168.0.239, and the DHCP client is enabled. If you loose
network connectivity after you reset the switch to the factory
defaults, see
network connectivity after you reset the switch to the factory
defaults, see
12.
To access the Factory Defaults page, click Maintenance
Reset Factory Default.