Netgear M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8*2.5G and 2x10G SFP+ Layer 3 하드웨어 매뉴얼

Click-attach the switch to the mount by doing the following:

a. Line up the back or bottom of the switch with the mount.

b.  Insert the mount’s locking tab and hook into the notches on the back or bottom of 

the switch.

c.  Slide the switch into the mount.

To install the switch in a rack, you need the 19-inch rack-mount kit supplied with the switch.



Attach the supplied mounting brackets to the side of the switch.

Insert the screws provided in the product package through each bracket and into the bracket 
mounting holes in the switch.

Tighten the screws with a No. 2 Phillips screwdriver to secure each bracket. 

Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head 

screws with nylon washers through each bracket and into the rack. 

Tighten the screws with a No. 2 Phillips screwdriver to secure mounting brackets to the rack.