Netgear AirCard 803S (Sprint) – 4G LTE Tri-Fi Hotspot 사용자 가이드

Get Started

● Web browser (required if you’ll be using the browser interface to view status and to

configure settings). The following browsers are supported:

 Internet Explorer (version 6.0 or higher)

 Mozilla Firefox (version 2.0 or higher)

 Google Chrome (version 2.0.172.28 or higher)

 Apple Safari (version 2.0 or higher)

 Opera version 9.64

● If you’ll be connecting the device through USB:

 Computer running Windows 7, Windows Vista, Windows XP, or Mac (OS X 10.4.x or

higher)

 USB 2.0 slot

Setting Up Your Device

Read step-by-step instructions for setting up the device.

Device Setup

This section describes how to set up your device.

1. Install the battery, as described in

2. Connect the device to the AC charger, as described in “Using the AC Charger with Your

Device’s micro-USB Port” in

3. Plug the AC charger into an electrical outlet.

4. Important: Charge the device until the battery icon is full (

Connecting to the Network

1. Make sure you are in a Sprint 4G, 4G LTE, or 3G coverage area (not roaming).

2. If you have a LAN connection, disconnect it.

3. Make sure your computer’s Wi-Fi is turned on.

4. If the device LCD displays “Charging,” “Charged,” or “Powered off,” press and hold the

power button

for two seconds.