Netgear AirCard 803S (Sprint) – 4G LTE Tri-Fi Hotspot 사용자 가이드
Browser Interface Home Page
67
4. To install the update, click Download and install now.
— or —
If you are not in a strong signal area, make a note of the URL displayed in the window
and click I’ll get the update later. At a later time, access the URL to download the
update to your computer, and then follow the steps in
5. When the installation is complete, reconnect to Wi-Fi. (See
Upgrading Firmware From a File
Use this option when you have an updated firmware file that you’ve, for example, downloaded
from the Sprint or Sierra Wireless website.
from the Sprint or Sierra Wireless website.
Note: During installation of the update:
• DO NOT turn off or unplug the device.
• Your Wi-Fi and Internet connections won’t be available.
When the installation is complete, you will need to reconnect to Wi-Fi. (See
• Your Wi-Fi and Internet connections won’t be available.
When the installation is complete, you will need to reconnect to Wi-Fi. (See
To upgrade the device firmware from a file:
1. Log in to the home page.
.)
3. Make sure your device is connected to the AC charger or computer through the
micro-USB cable.
4. Click Advanced settings (
).
5. If you want to later confirm that the upgrade was successful, write down the current
version information (shown in Device > About):
Software version
Firmware version (in the 3G Information section)
Firmware version (in the WiMAX Information section)
Firmware version (in the LTE Information section)
6. Click Device > Basic.
7. Optionally, save the current configuration (recommended).
Click Export.