Netgear AirCard 778S (Virgin Mobile) – NETGEAR® MINGLE™ Mobile Hotspot 사용자 가이드

4.  Click Submit. 

You can enable port forwarding for certain application types. 

Note:  Port forwarding must currently be enabled. (See 

.) 

1.  Log in to the home page. (See 

.) 

2.  Click Settings > Router > Port Forwarding. 

3.  In the blank row of the list, enter a Label that describes the application (for example, 

“RandomEmailApp”). 

4.  In the IP field, enter the IP address of the server to be accessed. 

5.  In the Port field, enter the port used by the application. (If the application uses more than 

one port, each port must be forwarded separately.) 

6.  In the Protocol list, click the protocol(s) used for this application (TCP, UDP). 

7.  Click the 

 to add this row to the list. 

8.  Click Submit. 

If you want to stop forwarding any ports, you can remove them from the forwarding list. 

Note:  Port forwarding must currently be enabled. (See 

.) 

1.  Log in to the home page. (See 

.) 

2.  Click Settings > Router > Port Forwarding. 

3.  Click the 

 beside the row that you want to remove. 

4.  Click Submit. 

You can select one computer to receive all unsolicited incoming connections. 

The IP address of the DMZ (“demilitarized zone”) is the default recipient of incoming packets 
(from the Internet) that are not handled by port forwarding rules or NAT’d connections: 

● 

If port forwarding is enabled, incoming traffic is routed according to the port forwarding 
rules or NAT’d connections. 

Device Settings 

78