Netgear AirCard 801S (Clear 4G) – Clear Spot 4G plus for Clear 사용자 가이드
Settings
Rev 1.0 Apr.10
103
— or —
To forward incoming traffic from certain IP addresses:
a.
Click
Restriction
.
b. In the two additional fields that are displayed, enter the start and end
IP addresses of a range.
5.
Using the DHCP Static IP Assignment List, assign an IP address based on
the MAC address of the computer that is in the DMZ. See
the MAC address of the computer that is in the DMZ. See
.
— or —
On the computer that is in the DMZ, disable DHCP, and manually assign the
IP address, gateway, and DNS server.
IP address, gateway, and DNS server.
Resetting the Software to Default Settings
Warning:
If you reset the software to default settings:
• You must go through the device setup (
), as if you've just purchased the device.
• Any changes you've made to the settings are lost.
Your 3G and 4G account information is not affected; after reset, the device remains provi-
sioned for service.
Your 3G and 4G account information is not affected; after reset, the device remains provi-
sioned for service.
You'll need to reset the software to default settings if:
•
You've forgotten the administrator password.
•
You've changed the DHCP settings such that the device is inoperable (for
example, there's no communication with the device).
example, there's no communication with the device).
You have two options to initiate the reset:
•
Through the software. See
•
Through the reset button on the device. See the following section.
Resetting the Software to Default Settings (Through the Reset Button)
1.
Remove the battery compartment cover.